- The SAP name has been synonymous with state-of-the-art analytical methods since its introduction over 30 years ago. SAP2000 follows in the same tradition featuring a very sophisticated, intuitive and versatile user interface powered by an unmatched analysis engine and design tools for engineers working on transportation, industrial, public works, sports, and other facilities.
- From its 3D object based graphical modeling environment to the wide variety of analysis and design options completely integrated across one powerful user interface, SAP2000 has proven to be the most integrated, productive and practical general purpose structural program on the market today. This intuitive interface allows you to create structural models rapidly and intuitively without long learning curve delays. Now you can harness the power of SAP2000 for all of your analysis and design tasks, including small day-to-day problems. Complex Models can be generated and meshed with powerful built in templates. Integrated design code features can automatically generate wind, wave, bridge, and seismic loads with comprehensive automatic steel and concrete design code checks per US, Canadian and international design standards.
- Advanced analytical techniques allow for step-by-step large deformation analysis, Eigen and Ritz analyses based on stiffness of nonlinear cases, catenary cable analysis, material nonlinear analysis with fiber hinges, multi-layered nonlinear shell element, buckling analysis, progressive collapse analysis, energy methods for drift control, velocity-dependent dampers, base isolators, support plasticity and nonlinear segmental construction analysis. Nonlinear analyses can be static and/or time history, with options for FNA nonlinear time history dynamic analysis and direct integration.
- From a simple small 2D static frame analysis to a large complex 3D nonlinear dynamic analysis, SAP2000 is the easiest, most productive solution for your structural analysis and design needs.
Graphical User Interface
Assign and select menu forms have been enhanced to allow them to remain open for repetitive use with a new apply button.DirectX graphics mode has been enhanced to use DirectX 11 for enhanced speed and capabilities.64-bit version of the graphical user interface (GUI) now available.Modeling
New 2-D modified Darwin-Pecknold concrete model has been added to the nonlinear layered shell. This model represents concrete compression, cracking, and shear behavior under both monotonic and cyclic loading, and accounts for crack rotation.Semi-rigid option added for diaphragm constraint.Modify undeformed geometry feature enhanced to allow applying the modification to a selection of joints, as well as limiting direction of modification.
Loading
Ability to specify accidental eccentricity for response spectrum cases added.
Automated response spectrum functions according to the Costa Rica Seismic Code 2010, Ecuador (NEC-SE-DS 2015), Korean KBC 2009, Mexico (CFE-93 and CFE-2008), and Peru (NTE E.030 2014) codes added.
Auto-seismic loading according to Korean Building Code (KBC 2009) added
Auto-seismic loading according to the Dominican Republic (R-001) code added
Analysis and Design
A new stability check has been added for nonlinear static load cases to report when the structure may have failed under material or geometric nonlinearities that are not obvious from the analysis results.
The handling of convergence tolerances for time-dependent behavior during staged-construction analysis has been improved to better enforce equilibrium after large load increments.
Concrete Frame Design - ACI 318-08, -11, -14 enhancement allows specifying Design System Rho (ρ) and Design System SDS factors in the concrete frame design preferences.
Steel Frame Design - Eurocode 3-2005 enhancement to perform a basic torsion design for I- and tubular sections.
Output and Result
Contour plots are now available for frame deflections and axial stresses.
The center of mass is now reported in the Assembled Joint Masses table for each mass source.
How to kill licensed app :
1. Disconnect from the Internet
2. Run Setup 32 or 64 bit (your preferred)
3. Run the keygen sap_v18_kg.exe and in the keygen folder it will be generated a lservrc license file (~4KB)
4. Copy the license file to :
a. For 32bit Windows : C:Program Files (x86)Computers and StructuresSAP2000 18 and C:Program Files (x86)Computers and StructuresSAP2000 18CSiLicensing
b. For 64bit Windows : C:Program FilesComputers and StructuresSAP2000 18 and C:Program FilesComputers and StructuresSAP2000 18CSiLicensing
c. For another user-chosen folder, find the directory and copy the license file there.
5. Make sure SAP2000.exe is blocked at the Firewall from connecting to the Internet
The How-to-crack above works. If the error "...license file missing etc etc" repeat the step above
License is valid for 311 days starting from 05/02/2016 (ends somewhere in mid December 2016). If you want this time not to end :
1. Change time at your windows clock and put it some years before 2016
2. Run Setup 32 or 64 bit (your preferred)
3. Run the keygen sap_v18_kg.exe and in the keygen folder it will be generated a lservrc license file (~4KB)
4. Copy the license file to :
a. For 32bit Windows : C:Program Files (x86)Computers and StructuresSAP2000 18 and C:Program Files (x86)Computers and StructuresSAP2000 18CSiLicensing
b. For 64bit Windows : C:Program FilesComputers and StructuresSAP2000 18 and C:Program FilesComputers and StructuresSAP2000 18CSiLicensing
c. For another user-chosen folder, find the directory and copy the license file there.
5. Make sure SAP2000.exe is blocked at the Firewall from connecting to the Internet
The How-to-crack above works. If the error "...license file missing etc etc" repeat the step above
License is valid for 311 days starting from 05/02/2016 (ends somewhere in mid December 2016). If you want this time not to end :
1. Change time at your windows clock and put it some years before 2016
Sign up here with your email
